ONEAC CDR Series Three-Phase Power Conditioner, 7.2 - 45 kVA
Semiconductor manufacturers face high productivity demands. They cannot afford to have production or test accuracy compromised by power disturbances. The ONEAC CDR Series of Three-Phase Power Conditioners are specifically engineered to meet their need for a clean, controlled electrical environment.
Performance Characteristics:
- Load Regulation Response Time: < 2 msec for a 50% change in load
- Surge Voltage Withstand Capability: ANSI/IEEE C62.41 Category A&B, 6kV/200 & 500 Amp, 100 kHz ringwave
- Surge and Noise Rejection-Isolation: with unit under power, and ANSI/IEEE C62.41 Category A pulse applied either normal mode (L-N) or common mode (N-G) at the input, the noise output voltage will be less than 10V normal mode and less than 0.5V common mode in all four quadrants using a Keytek 711A/J (or equivalent) surge generator and a low-voltage, high sensitivity probe.
- Overload Capability: all units will typically tolerate 10 times rated output for 0.5 cycle, 5.5 times rated output for 1 second, and 3.5 times rated output for 5 seconds without degradation
- Input Circuit Breaker: input breaker for low voltage (190-240) or high voltage (380-480) range
- Convenience Receptacles: A breaker protected receptacle panel is available for single or three phase (see options).